Kodak i260 Scanners Validation Tool and Brightness Contrast Control 3.18 Windows 2000/XP/Vista

Driver Brief

Version: 3.18
Release: 07/19/07
Update: 07/05/08
License:Free Driver
File Name: InstallSoftware_i200_v3.18.exe
File Size: 6.97 Mb
Environment: Windows 2000/XP/Vista
Category:Scanner Driver Download
Vendor:Kodak
Subcategory:Kodak Scanner Driver Download

>> Driver Download Link >>

Please confirm your driver selection!! If the wrong driver was downloaded and installed, The installed driver may cause your cmoputer problems.
Please input validate code for download. the validat code is case-sensitive.

Not Clear, Please Change a Picture

>> Driver Summary >>

Kodak i200 Series Scanners Validation Tool and Brightness Contrast Control 3.18 Windows 2000/XP/Vista.

Installing the latest Scanner Validation Tool (SVT) from the link on the bottom of this page will install both the latest TWAIN Data Source, and the latest ISIS Driver for the i200 Series Scanners. You must install the SVT to access these drivers, and to use the integrated Host Image Processing software, known as HIPPO.

All i200 Series Scanners, with or without the Flatbed Accessory, should be brought up to this level of Host Software, and the Firmware MUST be updated to v 2.5.5 i200 Firmware after the new SVT is installed. If this isn’t done the scanner will not work properly.

Software Driver CD Version 3.18 included with the latest SVT - July 2007:

  • ISIS 1.1.10506.20001
  • TWAIN 6.65.8
  • SVT 5.24
  • STI 2.5 (signed)

    IMPORTANT Note for KODAK Capture Software Users: If you install the latest SVT 5.24 and Firmware 2.5.5 you must use KODAK Capture Software Version 6.6 or higher in order for the scanner to work properly. Download the Lite version of Capture Software. To upgrade to the latest Full version of Capture Software, contact your Regional (local) Kodak Support Center.

    IMPORTANT NEW FEATURES OF THIS SOFTWARE:

  • Support for Windows Vista 32-bit ONLY
  • Adds the ability to accept custom color tables created with the Brightness and Contrast Control
  • Adds iThresholding feature to the i250 and i260 scanners. Note: if you are using Kodak Capture Software you will need to upgrade to Version 6.6 or higher to use this new feature (see above Note on using KODAK Capture Software).
  • Allows the i280 to scan as a single image documents up to 34" long.
  • After SVT is installed, a reboot is required.
  • SVT will no longer overwrite newer versions, you MUST UNINSTALL to load "older" versions

    • Related Driver for Kodak i260 Scanners Validation Tool and Brightness Contrast Control 3.18 Windows 2000/XP/Vista

    Kodak Download Driver Category

    Kodak i260 Scanners Validation Tool and Brightness Contrast Control 3.18 Windows 2000/XP/Vista